After our floor is prepped, coated, flaked, scraped, and vacuumed, we can start our final step — the application of the clear coat. Typically, we use a 96% solids Polyaspartic Polyurea UV stable clear coat that is applied at a rate of 145-160 sq. ft. per gallon. We start by clear coating all of the vertical surfaces and then brushing the perimeter of the floor itself. With the clear coat, instead of mixing one gallon of product at a time, we mix the entirety of the product needed to cover the whole floor. We pour the mixed product directly on to the floor and use a soft squeegee to spread the coating to our desired thickness. Then we use an 18 inch roller to back and cross roll the floor. This takes out any lines left behind by the squeegee and leaves a nice and even clear coat over the entire floor.